tolerance: 0.2 terminal cathode mark 3.0 2.0 1.6 2.3 0.5 0.3 1.6 1.7 2-r0.3 1.3 +0.2 -0.1 0 50 100 50 100 0 30 60 90 30 60 90 feeding direction 1.6 1.45 1.5 1.45 y x y? x? relative luminous intensity ( % ) angular displacement ( deg ) label position 13 60 180 11.41 tolerance: 0.2 tolerance: 0.2 + 1 0 0 ? 3 emitting color material package size (mm) part no. note) "-" will be taken out for emitting color b/e series. part no. forward voltage v f light wavelength reverse current i r brightness i v i f ( ma ) typ. ( v ) typ. ( mcd ) typ. ( nm ) p typ. ( nm ) min. ( mcd ) i f ( ma ) i f ( ma ) max. ( a ) resin color peak forward current i fp ? (ma) part no. power dissipation p d (mw) forward current i f (ma) reverse voltage v r (v) operating temperature t opr ( c) storage temperature t stg ( c) emitting color v r ( v ) peak half-wave ? algainp on gaas ingan on sic the recommended thickness of the screen mask for soldering is between 100 and 150m. the hole size of the screen mask should be same as the recommended land pattern or smaller. tape specifications:t86 <2,500pcs:reel> (unit:mm) sml-01 ? series blue green yellow orange red reel specifications SML012BC4T sml013bdt sml012bct sml012ect sml-012pt (a) sml012ec4t sml-012yt sml-012wt (a) sml-012dt sml-012ut sml-012vt (a) sml-013ut sml-011yt sml-011dt sml-011ut 20 30 100 100 5 -30 to +85 -30 to +85 -40 to +100 -40 to +100 blue green yellow orange red 84 84 78 25 60 62 75 transparent colorless SML012BC4T sml012bct sml013bdt sml012ec4t sml012ect sml-012pt (a) sml-012yt sml-012wt (a) sml-012dt sml-012ut sml-012vt (a) sml-013ut sml-011yt sml-011dt sml-011ut 3.2 3.3 3.2 3.2 3.3 2.1 2.0 20 20 20 100 10 523 590 611 630 26 468 36 518 35 565 ? ? 15 17 18 639 ? 20 ? 1 20 ? 1 20 ? 1 620 ? 2 ? 90 220 22 36 36 100 90 250 56 36 36 36 140 140 360 9.0 18 100 140 280 22 63 22 63 22 63 100 100 35.5 71 5 3020(1208) 3.0 2.0 ( t=1.3 ) sml012ect sml-012pt (a) sml012ec4t sml012bct sml013bdt SML012BC4T sml-011yt sml-012yt sml-012wt (a) sml-011dt sml-012dt sml-012ut sml-012vt (a) sml-013ut :duty 1/10,1khz. 2 : dominant d light wavelength sml01 ? series sml013bdt 2 0.05 4 0.1 1.5 1.75 0.1 0 to 0.5 2.4 1.6 8 3.5 0.05 +1 0 3.4 5.5 0 50 100 50 100 0 30 60 90 30 60 90 relative luminous intensity ( % ) angular displacement ( deg ) sml-01 ? series sml-01 ? (a) series y x y? x? sml-011ut chip leds with reflector 1208<3.0 2.0 t=1.3mm> medium / high brightness type absolute maximum ratings (ta=25 c) electrical optical characteristics (ta=25 c) 1: pulse width : 30ms recommended pad layout packaging specifications (unit:mm) directivity (typ.) dimensions (unit:mm)
forward current - forward voltage relative luminous intensity - case temperature relative luminous intensity - forward current ratio of maximum tolerable peak current - pulse duration derating relative luminous intensity - forward current electrical characteristic curves ratio of maximum tolerable peak current to maximum tolerable dc current i f peak m ax. i f m ax. ratio of maximum tolerable peak current to maximum tolerable dc current i f peak m ax. i f m ax. 10.00 1.00 0.10 0.01 1 10 100 relative luminous intensity forward current : (ma) 10 20 30 40 50 60 0 50 100 150 200 250 peak forward current : i f peak (ma) relative luminous intensity (%) 0 20 10 0 010 20 30 40 50 70 80 60 90 100 30 ambient temperature : ta ( c ) maximum forward current : i f m ax. (ma) ta=25 c 100.0 10.0 2.6 3.0 3.5 3.8 1.0 forward voltage : v f (v) forward current : i f (ma) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -20 -30 -10 0 102030405060708090100 i f =20ma relative luminous intensity case temperature : tc ( c ) 20 30 10 0 ambient temperature : ta ( c ) maximum forward current : i f m ax. (ma) -20-10 0 102030405060708090100 150 100 50 0 forward current : i f ( ma ) relative luminous intensity (%) 10 20 30 0 10khz 2khz 1khz 200hz 100hz 10khz 20khz 50khz 2khz 5khz 200hz 500hz 1 1 5 2.4 10 100 1000 10000 pulse duration : tw ( s) ta=25 c 100.0 10.0 20.0 1.0 1.5 2.0 2.5 3.0 1.0 forward voltage : v f (v) forward current : i f ( ma ) 1 1 5 10 3.3 10 100 1000 10000 pulse duration : tw ( s) ta=25 c ta=25 c ta=25 c ta=25 c SML012BC4T sml012ec4t sml013bdt sml012bct sml012ect ---- SML012BC4T sml012bct sml012ec4t sml012ect sml013bdt ---- sml-011yt sml-012yt sml-012wt(a) sml-011yt sml-012yt sml-012wt(a) sml-011dt sml-012dt sml-011ut sml-012ut sml-012vt(a) sml-012pt(a) sml-013ut ---- ---- ---- SML012BC4T sml012bct sml012ec4t sml012ect sml013bdt ---- SML012BC4T sml012bct sml012ec4t sml012ect sml013bdt sml-012pt(a) ---- ---- SML012BC4T sml012bct sml012ec4t sml012ect sml-012pt(a) sml013bdt ---- ---- sml-011yt sml-012yt sml-012wt(a) sml-011yt sml-012yt sml-011dt sml-012dt sml-011ut sml-012ut sml-012wt(a) sml-012vt(a) sml-013ut ---- sml-012pt(a) ---- sml-011yt sml-012yt sml-012wt(a) sml-011yt sml-012yt sml-012wt(a) sml-011dt sml-012dt sml-011ut sml-012ut sml-012vt(a) sml-013ut ---- sml-011yt sml-012yt sml-012wt(a) sml-011yt sml-012yt sml-012wt(a) sml-011dt sml-012dt sml-011ut sml-012ut sml-012vt(a) sml-013ut ---- sml-011yt sml-012yt sml-012wt(a) sml-012pt(a) sml-011yt sml-012yt sml-012wt(a) sml-011dt sml-012dt sml-011ut sml-012ut sml-012vt(a) sml-013ut 1khz ta=25 c 10khz 20khz 50khz 2khz 5khz 1khz 200hz 500hz 100hz 100hz
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / eupope / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2007 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21, saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
